 |
 |
 |
 |
 |
|---|
EMBA - 3 Colours Inline Casemaker |
|
Technical details |
|
| Card board thickness: | 1,5-8 mm |
|---|---|
| Output: | 12,5-250 blanks/minute |
| Main drive gear: | 38 kWt |
| Vacuum pump: | 22 kWt |
| Vacuum fan: | 11 kWt |
| Power limit: | 120 kWA |
| Power consumption: | 95-105 kWA |
| Air consumption: | about 150 L/minute free air for printing section |
| Air pressure: | 500-600 kPa |
| Nominal diameter of back cylinder: | 365 mm (included cliche) |
| Maximum printing area: | 1100х2440 mm |
| Slotting: | max. slot length 1000mm, (depends on card board quality) |
| Flat blanks: | max. width 2.000 mm |
| Maximum blank size: | 1100 х 2440 mm |
| Minimum blank size: | 280 х 600 mm |
|
|
Age: |
1988 |
Available: |
Immediately |
Price |
300.000 € EXW |
with feeder, 3 printers, slotter, die cutter, folder with Container Technics extrusion gluer from 2003, counter-ejector, except the die-cutter which is from 1984. |
|
KA-EN
GmbH - Liebig Str. 120- 50823 Köln- Germany
Phone : +49-221-3467200- Fax : +49-221-3467199- e-mail : mail@kaengmbh.com